Suzuki XL7 2007 Service Manual page 1615

7. Install the shift control cable (2) to the shift control
cable bracket (3). Ensure the shift control cable
retaining tabs fully engage the shift control cable
bracket.
8. Connect the shift control cable (1) to the transaxle
range switch lever (4).
9. Install the battery tray. Refer to "Battery Tray
Replacement: ".
10. Adjust the shift control cable. Refer to "Shift Control
Cable Adjustment".
11. Enable the supplemental inflatable restraint (SIR)
system. Refer to "SIR Disabling and Enabling: ".
12. Release the parking brake.
Shift Control Cable Adjustment
1. Position the shift lever in PARK.
2. Release the shift control cable adjustment lock cover
retaining tab (1) on the bottom side.
Automatic Transmission:
3. Slide the shift control cable adjustment lock cover (2)
forward exposing the adjustment lock.
4. Carefully squeeze the adjustment lock tabs (1)
inward to disengage the adjustment lock.
5. Lift the shift control cable adjustment lock (3).
6. The shift control cable (1) and cable end (2) are free
to slide to proper adjustment. Ensure the shift lever
and transmission are both in the PARK position.
5A-205