Suzuki XL7 2007 Service Manual page 1802

6C-20 Power Assisted Steering System:
Power Steering Pump Inlet Pipe Replacement
Callout
Preliminary Procedure
Remove the right front tire/wheel assembly. Refer to "Tire and Wheel Removal and Installation: ".
1 Power Steering Fluid Reservoir Outlet Hose Clamp
2 Power Steering Fluid Reservoir Outlet Hose
Power Steering Pump Inlet Pipe Bolt
CAUTION
!
3 Refer to "Fastener Notice: ".
Tightening torque
Tighten to 8 N⋅m (71 lb in).
Power Steering Pump Inlet Pipe Seal
4
Tip: Discard the O-ring seal and use a NEW O-ring seal prior to installation.
Power Steering Pump Inlet Pipe
5 Procedure
Fill and bleed the power steering system. Refer to "Power Steering System Bleeding".
Component Name