Table of Contents
Advertisement
6C-14 Power Assisted Steering System:
Power Steering Pump Replacement
Removal Procedure
NOTE
Do not remove the drive belt from the vehicle
entirely. Only slip it off the power steering
pump and set it aside in the engine
compartment.
1. Remove the drive belt. Refer to "Drive Belt
Replacement: ".
2. Remove the right side engine splash shield. Refer to
"Engine Splash Shield Replacement - Right Side: ".
3. Place drain pans under the vehicle as needed.
4. Compress the power steering reservoir outlet hose
clamp (1) and disconnect the power steering
reservoir outlet hose (2) from the power steering
pump.
5. Disconnect the power steering gear inlet hose (1)
from the power steering pump.
6. Remove the power steering pump bolts (1).
7. Remove the power steering pump through the right
wheel house area.
8. Transfer the power steering pulley if needed. Refer
to "Power Steering Pump Pulley Replacement".
Advertisement
Table of Contents
Troubleshooting
