Table of Contents
Advertisement
6C-12 Power Assisted Steering System:
Callout
Preliminary Procedures
1. Remove the fuel injector sight shield. Refer to "Fuel Injector Sight Shield Replacement: "
2. Remove the air cleaner outlet duct. Refer to "Air Cleaner Outlet Duct Replacement: ".
3. Remove the right side engine splash shield. Refer to "Engine Splash Shield Replacement - Right Side: ".
Power Steering Reservoir Outlet Hose Clamp
Procedure
1
1. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
2. Place drain pans under the vehicle as needed.
2
Power Steering Fluid Reservoir Outlet Hose
3
Power Steering Cooler Pipe Clamp
4
Power Steering Cooler Pipe
Remote Power Steering Fluid Reservoir Bolts (Qty: 2)
CAUTION
!
5
Refer to "Fastener Notice: ".
Tightening torque
9 N⋅m (80 lb in)
Remote Power Steering Fluid Reservoir Bolt
6
Tightening torque
9 N⋅m (80 lb in)
Ground Terminal Nut
7
Tightening torque
9 N⋅m (80 lb in)
8
Ground Terminal
Power Steering Fluid Reservoir Stud
9
Tightening torque
9 N⋅m (80 lb in)
Remote Power Steering Fluid Reservoir
10
Procedure
Fill and bleed the power steering system. Refer to "Power Steering System Bleeding".
Component Name
Advertisement
Table of Contents
Troubleshooting
