Suzuki XL7 2007 Service Manual page 1801

6. Compress the power steering reservoir outlet hose
clamp (1) and disconnect the power steering
reservoir outlet hose (2) from the power steering
pump.
7. Remove the power steering reservoir outlet hose.
Installation Procedure
1. Position the power steering reservoir outlet hose to
the vehicle.
2. Compress the power steering reservoir outlet hose
clamp (1) and connect the power steering reservoir
outlet hose (2) to the power steering pump.
Power Assisted Steering System:
3. Compress the power steering reservoir outlet hose
clamp (1) and connect the power steering reservoir
outlet hose (2) to the remote power steering fluid
reservoir.
4. Clean any excess power steering fluid from the
vehicle and remove the drain pans.
5. Install the right side engine splash shield. Refer to
"Engine Splash Shield Replacement - Right Side: ".
6. Install the fuel injector sight shield. Refer to "Fuel
Injector Sight Shield Replacement: ".
7. Fill and bleed the power steering system. Refer to
"Power Steering System Bleeding".
6C-19