Shift Control Replacement
Callout
Preliminary Procedures
1. Disable the supplemental inflatable restraint (SIR) system. Refer to "SIR Disabling and Enabling: ".
2. Remove the shift control lever knob. Refer to "Transmission Control Lever Knob Replacement".
3. Remove the shift control boot. Refer to "Transmission Control Boot Replacement".
4. Remove the instrument panel lower brace bezel. Refer to "Instrument Panel Lower Brace Bezel Replacement: ".
5. Disconnect the shift control cable. Refer to "Shift Control Cable Replacement".
6. Disconnect the shift control electrical connector.
Shift Control Nuts (Qty 4).
CAUTION
!
1
Refer to.
Tightening torque
Tighten the nuts to 25 N⋅m (18 lb ft).
2
Shift Control
Automatic Transmission:
Component Name
5A-201