Table of Contents
Advertisement
5A-216 Automatic Transmission:
Installation Procedure
1. Position the transaxle mount bracket (2) to the
transaxle.
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
2. Install the transmission mount bracket bolts (1).
Tightening torque
Tighten the nuts to 55 N⋅m (41 lb ft).
3. Install the left transaxle mount. Refer to
"Transmission Mount Replacement - Left Side".
4. Install the left engine splash shield. Refer to "Engine
Splash Shield Replacement - Left Side: ".
5. Remove the transaxle stand.
6. Lower the vehicle.
Fluid Level Indicator Replacement
Removal Procedure
1. Clean any dirt or debris away from the transaxle fluid
plug/level indicator area.
2. Remove the transaxle fluid level indicator bolt from
the transaxle.
3. Remove the transaxle fluid level indicator from the
transaxle.
4. Wipe away any transaxle fluid from the fluid level
indicator.
Installation Procedure
1. Install the transaxle fluid level indicator onto the
transaxle.
CAUTION
!
Refer to "Fastener Notice: ".
Advertisement
Table of Contents
Troubleshooting
