Table of Contents
Advertisement
Steering Wheel Replacement
Callout
Preliminary Procedure
Remove the inflatable restraint steering wheel module. Refer to "Inflatable Restraint Steering Wheel Module
Replacement: ".
Steering Wheel Nut
CAUTION
!
1
Refer to "Fastener Notice: ".
Tightening torque
37 N⋅m (27 lb ft)
Steering Wheel
Procedure
1. Disconnect any electrical connectors as needed.
2. Remove the steering wheel using puller J 1859-A and puller legs J 42578.
2
3. Make an alignment mark to note the relationship between the steering wheel and the steering
shaft. The marks will be needed to align the wheel during installation.
Special Tools
• J 1859-A Steering Wheel Puller
• J 42578 Steering Wheel Puller Legs
Steering Wheel and Column:
Component Name
6B-12
Advertisement
Table of Contents
Troubleshooting
