1F2-16 M161 ENGINE CONTROLS
1 Camshaft Position Sensor Connector
2 Bolt
The Camshaft Position (CMP) sensor sends a CMP signal to the Engine Control Module (ECM). The ECM uses
this signal as a "synchronized pulse" to trigger the injectors in the proper sequence. The ECM uses the CMP
signal to indicate the position of the #1 piston during its power stroke. This allows the ECM to calculate true
sequential fuel injection mode of operation.
CAMSHAFT POSITION (CMP) SENSOR
3 Camshaft Position Sensor
4 O-Ring
YAA1F950
SSANGYONG Y200