Table of Contents
Advertisement
Before inSTALLATion
• You must turn off the product before installing it.
• A severe impact or vibration may cause a system failure.
• Keep it away from a strong magnetic field or electric interference, or wireless devices such as radio or TV set.
• Keep the installation site clean and dust-free all the time while or after you have installed the product.
• Place it on an unsealed, flat surface at an optimal temperature.
Install it at least 15cm away from the wall.
• Do not close the ventilation hole or put a conductive object in it.
• Do not expose it to the direct sunlight. Keep the accessories or tools out of people's reach in an attempt
to prevent a risk of physical damage.
• Leaving an abnormal smoke or smell as it is may lead to a fire or electric shock.
If this is the case, turn off the product immediately and contact us for a technical assistance.
• Take an appropriate action if you find: damp floor, unearthed power extension cord, peeled-off power
cable, or absence of safety grounding.
Use a dry cloth to wipe it out. If badly dirty or stained, use a cloth soaked into neutral detergent to wipe it out.
`
J
Do not use volatile solvents such as alcohol, benzene or thinner that may damage the product surface.
Do not operate the LCD monitor at a high temperature; recommended to use the screen saver for power conversation.
`
ADjuSTinG THe SCreen AnGLe of THe SySTem
ConTroLLer
You can pull the screen forward for a better view.
English _15
Hide quick links:
Advertisement
Table of Contents
