Lacp Global-Passive-Mode Enable - Centrecom FS980M/9 Command Reference Manual

L A C
INK GGREGATION OMMANDS
- -
LACP GLOBAL PASSIVE MODE ENABLE

lacp global-passive-mode enable

Overview Use this command to enable LACP channel-groups to dynamically self-configure
when they are connected to another device that has LACP channel-groups
configured with Active Mode.
lacp global-passive-mode enable
Syntax
no lacp global-passive-mode enable
Default Enabled
Mode Global Configuration
Usage Do not mix LACP configurations (manual & dynamic). When LACP global passive
mode is turned on (by using the lacp global-passive-mode enable command),
we do not recommend using a mixed configuration in a LACP channel-group; i.e.
some links are manually configured (by the channel-group command) and others
are dynamically learned in the same channel-group.
Example To enable global passive mode for LACP channel groups, use the command:
awplus(config)#
To disable global passive mode for LACP channel groups, use the command:
awplus(config)#
Related show etherchannel
Commands
show etherchannel detail
613-50137-01 Rev A
lacp global-passive-mode enable
no lacp global-passive-mode enable
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
525