Show Atmf Container - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF CONTAINER

show atmf container
Overview Use this command to display information about the AMF containers created on a
a Virtual AMF Appliance (VAA).
An AMF container is an isolated instance of AlliedWare Plus with its own network
interfaces, configuration, and file system. The features available inside an AMF
container are a sub-set of the features available on the host VAA. These features
enable the AMF container to function as a uniquely identifiable AMF master and
allows for multiple tenants (up to 60) to run on a single VAA host. See the
AMF Feature Overview and_Configuration Guide
multiple tenants on a single VAA host.
show atmf container [detail] [<container-name>]
Syntax
Mode Privileged Exec
Output Figure 38-14: Example output from show atmf container
Figure 38-15: Example output from show atmf container vac-wlg-1
613-50157-01 Rev C
™ (AMF) C
RAMEWORK OMMANDS
Parameter
detail
<container-name> The name of the AMF container you wish to display
awplus#show atmf container 

ATMF Container Information: 

Container Area
------------------------------------------------------------------
vac-wlg-1 wlg
vac-akl-1 akl
vac-nsn-1 nsn

Current ATMF Container count: 3
awplus#show atmf container vac-wlg-1

ATMF Container Information: 

Container Area
------------------------------------------------------------------
vac-wlg-1 wlg

Current ATMF Container count: 1
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Description
Show detailed information.
information for.
Bridge
br1
br2
br3
Bridge
br1
for more information on running
State Memory
running 70.3 MB
stopped 0 bytes
running 53.2 MB
State Memory
running 70.3 MB
CPU%
1.2 
0.0 
0.7
CPU%
1.2 
1421