Allied Telesis x510-28GTX Command Reference Manual page 337

C F M
ONNECTIVITY AULT ANAGEMENT
(FNG )
MEP ATTRIBUTES
Example To clear an alarm after the defect has been abated for 6 seconds, use the
commands:
awplus(config)#
awplus(config-if)#
MD-INST2 ma-name MA-INST2-1
awplus(config-if-eth-cfm-mep)#
Related clear (MEP Attribute)
Commands
ethernet cfm domain-name
ethernet cfm mep
service ma-name
show mep-alarm status
Command Version 5.4.7-1.1: command added
changes
C613-50170-01 Rev B
C
OMMANDS
interface port1.0.2
ethernet cfm mep down mpid 12 domain-name
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
mep reset-fng-time 600
337