C
F
M
ONNECTIVITY
AULT
ANAGEMENT
SHOW ETHERNET CFM ERRORLOG
show ethernet cfm errorlog
Overview
Use this command to list the CFM Errors that are in the CFM Errors Event List,
starting from the oldest at the top to the latest at the end.
show ethernet cfm errorlog domain <domain-name>
Syntax
Mode
Privileged Exec
Usage
When a new error is detected for a Maintenance Association (MA) that is associated
with a Maintenance Domain (MD), and such is due to an error from a received or
missing CCM from a Remote MEP, an event is logged to the CFM Errors Event List.
Example
To show the list of errors for an MD named "MD-INST2", use the command:
awplus#
Output
Figure 9-5:
Table 9-3: Parameters in the output from show ethernet cfm errorlog domain
C613-50170-01 Rev B
C
OMMANDS
Parameter
Description
<domain-name>
Specify the domain name value.
show ethernet cfm errorlog domain MD-INST2
Example output from show ethernet cfm errorlog domain
MD-INST2
awplus#show ethernet cfm errorlog domain MD-INST2
CFM Service Name
Level VLAN MEPID Remote MAC
------------------------------------------------------------------
MA-INST2-1
0
MD-INST2
Parameter
Level
VLAN
MEPID
Remote MAC
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
0
12
0000.0000.0000
Description
The level configured for the MD.
The VLAN ID used by the MA if any, otherwise is "0".
The MEP ID of the local MEP that detected the error.
The source MAC address of the received CCM causing the
error if known, 0000.0000.0000 otherwise.
Error Reason
Remote MEP Down
354