Table of Contents
Advertisement
C
F
M
ONNECTIVITY
AULT
ANAGEMENT
SHOW ETHERNET CFM MAINTENANCE
Table 9-5: Parameters in the output from show ethernet cfm
Related
clear mep counter
Commands
ethernet cfm mep
show ethernet cfm details
C613-50170-01 Rev B
C
OMMANDS
-
POINTS LOCAL MEP
maintenance-points local mep domain <domain-name> service
<ma-name> mep <mep-id> details (cont.)
Parameter
Error CCM Reason
Last Error CCM
Cross Connect
Defect Reason
Last Cross Connect
CCM
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The reason that the local MEP is detecting the
errorCCMdefect condition (if any):
Wrong MEP ID Received - CCM received with correct level
and MAID, but MEP ID has not been configured in this MA.
My MEP ID Received - CCM received with correct level and
MAID, but an MEP ID that is the same as a local MEP in this
MA.
My MEP ID Received (loop) - as above, but the CCM
received also has the same MAC address as the local MEP
in the MA.
CCM Interval Mismatch - CCM received with correct level
and MAID, but CCM interval does not match that
configured for this MA.
MAC address mismatch - for a configured unicast RMEP
(via crosscheck) the MAC address did not match the
provisioned value in the associated MA.
N/A - indicates there is no error CCM defect being
detected.
If an errorCCMdefect condition is detected, portions of the
CCM that caused this condition are displayed.
The reason that the local MEP is detecting the
xconCCMdefect condition (if any):
Wrong MAID - CCM received with correct level but
incorrect MAID (mismatch in the domain name and/or
short MA name versus configured).
Wrong Level - CCM received with a level that is lower than
the level configured for this local MEP's domain.
N/A - indicates there is no error CCM defect being
detected.
If a xconCCMdefect condition is detected, portions of the
CCM that caused this condition are displayed.
360
Hide quick links:
Advertisement
Chapters
Table of Contents
