Allied Telesis x510-28GTX Command Reference Manual page 332

C F M
ONNECTIVITY AULT ANAGEMENT
-
ETHERNET CFM DOMAIN NAME
Mode Global Configuration
Usage A Maintenance Domain is a Connectivity Fault Management (CFM) term that
represents the administrative area of a network from which an operator can
manage VLANs that traverse their area. An MD can also be scoped to a simple
Ethernet link. To differentiate different administrative areas, an MD is made up of a
name and a level. As part of CFM, a Connectivity Check Message (CCM) is used to
detect Ethernet connectivity faults amongst nodes that participate in CFM. CCM
messages carry the MD name within the MAID field as well as carries the level of
the MD.
This command is used to configure the MD name, which can be chosen from a
variety of name format types, as well as the level.
Example To create a Maintenance Domain instance named "MD-INST2" with a character
string-based name of "MD-12L3" and a level of 3, use the command:
awplus(config)#
character-string md-type-name MD-12L3 level 3
To enter Ethernet CFM Configuration mode for an existing MD instance named
"MD-INST2", use the command:
awplus(config)#
awplus(config-ether-cfm)#
To destroy a Maintenance Domain instance named "MD-INST2", use the
command:
awplus(config)#
Related cc interval
Commands
cc multicast
cc unicast
C613-50170-01 Rev B
C
OMMANDS
Parameter
mac
no-name
level
<level>
mip-creation
none
ethernet cfm domain-name MD-INST2 md-type
ethernet cfm domain-name MD-INST2
no ethernet cfm domain-name MD-INST2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Specify the md-type as MAC-based MD name format. The
<md-type-name> consists of a MAC address + 2-octet
(unsigned) integer in the form of HHHH.HHHH.HHHH:<2-octet
integer>. This MAC based string plus the Short MA name that
is configured for an MA make up the MAID field in a CCM
message.
Specify the md-type whereby no MD name is to appear in the
CCM message.
Specify the Level the Domain operates in.
0 to 7.
Optional parameter that specifies the MIP creation permission
value.
Specifies that no MIPs are to be created (default and only
choice).
332