YASKAWA FS100 Maintenance Manual page 6

Hide thumbs Also See for FS100:
Table of Contents

Advertisement

FS100
Notes for Safe Operation
Before operating the manipulator, check that servo power is turned
OFF when the emergency stop button on the programming pendant
is pressed.
When the servo power is turned OFF, the SERVO ON LED on the
programing pendant is turned OFF.
Injury or damage to machinery may result if the emergency stop circuit
cannot stop the manipulator during an emergency. The manipulator
should not be used if the emergency stop button does not function.
Fig. : Emergency Stop Button
In the case of not using the programming pendant, be sure to
supply the emergency stop button on the equipment. Then before
operating the manipulator, check to be sure that the servo power is
turned OFF by pressing the emergency stop button.
Connect the external emergency stop button to the 5-6 pin and 16-
17 pin of the robot system signal connector (CN2).
Upon shipment of the FS100, this signal is connected by a jumper
cable in the dummy connector. To use the signal, make sure to
supply a new connector, and then input it.
If the signal is input with the jumper cable connected, it does not
function, which may result in personal injury or equipment damage.
Once the emergency stop button is released, clear the cell of all
items which could interfere with the operation of the manipulator.
Then turn the servo power ON.
Injury may result from unintentional or unexpected manipulator motion.
Fig. : Release of Emergency Stop Button
TURN
Observe the following precautions when performing teaching
operations within the manipulator's operating range:
– Be sure to use a lockout device to the safeguarding when going
inside. Also, display the sign that the operation is being
performed inside the safeguarding and make sure no one closes
the safeguarding.
– View the manipulator from the front whenever possible.
– Always follow the predetermined operating procedure.
– Ensure that you have a safe place to retreat in case of
emergency.
Improper or unintended manipulator operation may result in injury.
vi
WARNING
159645-1CD
RE-CHO-A111
6 of 348

Advertisement

Table of Contents
loading

Table of Contents