YASKAWA FS100 Maintenance Manual page 332

FS100
Error No. Data Error Message
3240 - Undefined application
3250 - Cannot load this file
3260 - Excess input data
3270 - Cannot verify this file
3290 - Serial port not defined
3300 - Serial port being used
3310 - Protocol being used
3350 - Not enough memory
3360 - Invalid folder
3370 - Incorrect folder name
3380 - Drive not ready
3390 - File not found
3400 - File already exists on the media
3410 - Out of memory on the media
3420 - Max number of files has been reached
3430 - I/O error on the drive
3440 - Wrong media type
3450 - Cannot load macro JOB at current
security mode
3460 * Cannot backup the media
1
2
3470 - Database not found
3480 - Database access error
3490 - Same database exists
3500 - Check the media insertion
3501 - Check the media insertion
3510 - Cannot delete folder. Check attribute
and inside file
3520 - Same folder exists
3530 - Cannot load at current security mode
3540 - CMOS not compatible
3550 - Under automatic backup operation.
Operate after the backup is
completed.
3551 - Under automatic backup operation.
Operate "SORT FILE" after the
backup is completed.
3560 - Failed in sorting backup file
3570 - Actuator data transmission error
3580 - Under backup file access. Operate
after the access is completed.
3581 - Under backup file access. Operate
"SORT FILE" after the access is
completed.
10 Error
10.1 Error Message
10-12
Contents
Load in management mode.
Insufficient Compact Flash memory.
Not accessible to Compact Flash.
159645-1CD
RE-CHO-A111
332 of 348