YASKAWA FS100 Maintenance Manual page 134

Alarm Alarm Name Sub
Number Code
821 CNTR01R SOFTWARE
ERROR
822 CNTR01R WDG ERROR 100
200
300
400
500
600
700
800
Meaning Cause
Sub Code: Option board. CNTR01R board failure
Number×100 factor
factor:
1 WDG TIMEOVER
2 ADDRESS ERR(READ)
EXCEPTION
3 ADDRESS ERR(WRITE)
EXCEPTION
4 UNJUST INST
EXCEPTION
5 UNJUST SLOT
EXCEPTION
A Watchdog err was detected in CNTR01R board failure
the Option #1 board.
A Watchdog err was detected in CNTR01R board failure
the Option #2 board.
A Watchdog err was detected in CNTR01R board failure
the Option #3 board.
A Watchdog err was detected in CNTR01R board failure
the Option #4 board.
A Watchdog err was detected in CNTR01R board failure
the Option #5 board.
A Watchdog err was detected in CNTR01R board failure
the Option #6 board.
A Watchdog err was detected in CNTR01R board failure
the Option #7 board.
A Watchdog err was detected in CNTR01R board failure
the Option #8 board.
Remedy
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the CNTR01R board. Save the CMOS.BIN
before replacing the board to be safe.
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the CNTR01R board. Save the CMOS.BIN
before replacing the board to be safe.
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the CNTR01R board. Save the CMOS.BIN
before replacing the board to be safe.
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the CNTR01R board. Save the CMOS.BIN
before replacing the board to be safe.
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the CNTR01R board. Save the CMOS.BIN
before replacing the board to be safe.
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the CNTR01R board. Save the CMOS.BIN
before replacing the board to be safe.
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the CNTR01R board. Save the CMOS.BIN
before replacing the board to be safe.
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the CNTR01R board. Save the CMOS.BIN
before replacing the board to be safe.
(1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the CNTR01R board. Save the CMOS.BIN
before replacing the board to be safe.
134 of 348