YASKAWA FS100 Maintenance Manual page 214

Alarm Alarm Name Sub
Number Code
139
140
141
142
143
144
145
146
147
Meaning Cause
Queue operation error for Software operation error
instruction execution (at ENQUE) occurred
Queue operation error for Software operation error
instruction execution (at DEQUE) occurred
Queue operation error for Software operation error
instruction execution (undefined occurred
operation)
Queue operation error for Software operation error
instruction execution (data length occurred
too long)
Queue operation error for WORK Software operation error
ID conveyor (at ENQUE) occurred
Queue operation error for WORK Software operation error
ID conveyor (at DEQUE) occurred
Queue operation error for WORK Software operation error
ID conveyor (undefined operation) occurred
Queue operation error for WORK Software operation error
ID conveyor (data length too long) occurred
Queue operation error for WORK Software operation error
IN/OUT checking conveyor (at occurred
ENQUE)
Remedy
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your YASKAWA representative about occurrence status (operating
procedure).
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your YASKAWA representative about occurrence status (operating
procedure).
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your YASKAWA representative about occurrence status (operating
procedure).
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your YASKAWA representative about occurrence status (operating
procedure).
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your YASKAWA representative about occurrence status (operating
procedure).
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your YASKAWA representative about occurrence status (operating
procedure).
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your YASKAWA representative about occurrence status (operating
procedure).
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your YASKAWA representative about occurrence status (operating
procedure).
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your YASKAWA representative about occurrence status (operating
procedure).
214 of 348