YASKAWA FS100 Maintenance Manual page 171

Alarm Alarm Name Sub
Number Code
4022 MEMORY ERROR
(PAINT SPECIAL FILE)
4023 MEMORY ERROR
(PAINT COND FILE)
4025 MEMORY ERROR
(INTERRUPT JOB FILE)
4028 MEMORY ERROR
(SENSOR MON COND
FILE)
4034 MEMORY ERROR
(ANTICIPATION OT FILE)
4035 MEMORY ERROR
(ANTICIPATION OG
FILE)
Meaning Cause
Sub Code: Page number Data error
Main CPU board failure
Sub Code: Page number Data error
Main CPU board failure
Data error
Main CPU board failure
Data error
Main CPU board failure
Data error
Main CPU board failure
Data error
Remedy
(1)Reset the alarm.
(2)If the alarm occurs again, initialize the paint special file in maintenance
mode, and then load the paint special file saved in the external memory device.
(1)Reset the alarm.
(2)If the alarm occurs again, replace controller. Save the CMOS.BIN before
replace controller to be safe.
(1)Reset the alarm.
(2)If the alarm occurs again, initialize the paint condition file in maintenance
mode, and then load the paint condition file saved in the external memory
device.
(1)Reset the alarm.
(2)If the alarm occurs again, replace controller. Save the CMOS.BIN before
replace controller to be safe.
(1)Reset the alarm.
(2)If the alarm occurs again, initialize the interrupt job file in maintenance mode,
and then load the interrupt job file saved in the external memory device.
(1)Reset the alarm.
(2)If the alarm occurs again, replace controller. Save the CMOS.BIN before
replace controller to be safe.
(1)Reset the alarm.
(2)If the alarm occurs again, initialize the sensor monitoring condition file in
maintenance mode, and then load the sensor monitoring condition file saved in
the external memory device.
(1)Reset the alarm.
(2)If the alarm occurs again, replace controller. Save the CMOS.BIN before
replace controller to be safe.
(1)Reset the alarm.
(2)If the alarm occurs again, initialize the anticipation output (OT) file in
maintenance mode, and then load the anticipation output (OT) file saved in the
external memory device.
(1)Reset the alarm.
(2)If the alarm occurs again, replace controller. Save the CMOS.BIN before
replace controller to be safe.
(1)Reset the alarm.
(2)If the alarm occurs again, initialize the anticipation output (OG) file in
maintenance mode, and then load the anticipation output (OG) file saved in the
external memory device.
171 of 348