CHAPTER 19
Radiation and Laser Warnings
Laser and LED Safety Guidelines and Warnings for EX Series Switches
General Laser Safety Guidelines
Copyright © 2010, Juniper Networks, Inc.
Laser and LED Safety Guidelines and Warnings for EX Series Switches on page 275
Radiation from Open Port Apertures Warning for EX Series Switches on page 278
EX Series switches and the XRE200 External Routing Engine are equipped with laser
transmitters, which are considered a Class 1 Laser Product by the U.S. Food and Drug
Administration and are evaluated as a Class 1 Laser Product per EN 60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines on page 275
Class 1 Laser Product Warning on page 276
Class 1 LED Product Warning on page 276
Laser Beam Warning on page 277
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
275