Laser And Led Safety Guidelines And Warnings; General Laser Safety Guidelines; Class 1 Laser Product Warning - Juniper PTX1000 Hardware Manual

PTX1000 Packet Transport Router Hardware Guide
Related
Documentation

Laser and LED Safety Guidelines and Warnings

General Laser Safety Guidelines

Class 1 Laser Product Warning

126
General Safety Guidelines and Warnings on page 112
Laser and LED Safety Guidelines and Warnings on page 126
Installation Instructions Warning on page 117
Grounded Equipment Warning on page 124
Juniper Networks devices are equipped with laser transmitters, which are considered a
Class 1 Laser Product by the U.S. Food and Drug Administration and are evaluated as a
Class 1 Laser Product per EN 60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines on page 126
Class 1 Laser Product Warning on page 126
Class 1 LED Product Warning on page 127
Laser Beam Warning on page 127
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
WARNING: Class 1 laser product.
Waarschuwing Klasse-1 laser produkt.
Varoitus Luokan 1 lasertuote.
Attention Produit laser de classe I.
Warnung Laserprodukt der Klasse 1.
Copyright © 2018, Juniper Networks, Inc.