Laser And Led Safety Guidelines And Warnings; T320 General Laser Safety Guidelines; Laser Safety Warnings For Juniper Networks Devices - Juniper Core Router T Series Hardware Manual

CHAPTER 39
Laser and LED Safety Guidelines and
Warnings

T320 General Laser Safety Guidelines

Related
Documentation

Laser Safety Warnings for Juniper Networks Devices

Copyright © 2018, Juniper Networks, Inc.
T320 General Laser Safety Guidelines on page 343
Laser Safety Warnings for Juniper Networks Devices on page 343
Physical Interface Cards (PICs) with single-mode optical interfaces are equipped with
laser transmitters, which are considered a Class 1 Laser Product by the U.S. Food and
Drug Administration, and are evaluated as a Class 1 Laser Product per EN 60825–1 +A11
+A2 requirements.
When working around PICs, observe the following safety guidelines to prevent eye injury:
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
General Safety Guidelines for Juniper Networks Devices on page 327
Maintenance and Operational Safety Warnings for Juniper Networks Devices on page 347
Class 1 Laser Product Warning on page 344
Class 1 LED Product Warning on page 344
343