Ptx1000 Management Cable Specifications And Pinouts; Cable Specifications For Console And Management Connections For The Ptx1000 - Juniper PTX1000 Hardware Manual

PTX1000 Management Cable Specifications and
Pinouts
IN THIS SECTION

Cable Specifications for Console and Management Connections for the PTX1000 | 69

Management Port Connector Pinouts for the PTX1000 | 70
Console Port Connector Pinouts for the PTX1000 | 70
USB Port Specifications for the PTX1000 | 71
Cable Specifications for Console and Management Connections for the
PTX1000
Table 27 on page 69 lists the specifications for the cables that connect the PTX1000 to a management
device.
NOTE: The PTX1000 also has an SFP management port that supports transceivers that use
fiber-optic cables. See
information about supported transceivers.
Table 27: Cable Specifications for Console and Management Connections for the PTX1000
Port on PTX1000 Cable Specification
Console (CON) port RS-232 (EIA-232) serial
cable
Management Category 5 cable or
(MGMT) port equivalent suitable for
1000BASE-T operation
"Determining Transceiver Support for the PTX1000" on page 58
Cable Supplied
One 7-foot (2.13-meter)-long
RJ-45 patch cable and RJ-45
to DB-9 adapter
One 7-foot (2.13-meter)-long
RJ-45 patch cable
for more
Maximum Device
Length Receptacle
7 feet RJ-45
(2.13 meters)
328 feet RJ-45
(100 meters)
69