Cable Specifications For Console And Management Connections For An Acx5000; Router; Grounding Cable And Lug Specifications For An Acx5000 Router; Table 47: Cable Specifications For Console And Management Connections For - Juniper ACX5048 Manual

Table 46: QSFP+ MPO Fiber-Optic Crossover Cable Pinouts (continued)
Pin
12

Cable Specifications for Console and Management Connections for an ACX5000

Router

Table 47: Cable Specifications for Console and Management Connections for the ACX5000

Router

Port on ACX5000
Routers Cable Specification
Console port RS-232 (EIA-232) serial cable
Management port Category 5 cable or
equivalent suitable for
1000BASE-T operation

Grounding Cable and Lug Specifications for an ACX5000 Router

Copyright © 2015, Juniper Networks, Inc.
Table 47 on page 93 lists the specifications for the cables that connect the ACX5000
routers to a management device.
NOTE: The ACX5000 routers can be configured with SFP management ports
that support 1000BASE-SX transceivers. See
SFP, SFP+, and QSFP+ Transceivers for an ACX5000 Router" on page 62
more on the fiber-optic cables required for use with these transceivers.
Cable Supplied
One 7-foot (2.13-meter) long
RJ-45 patch cable and RJ-45 to
DB-9 adapter
One 7-foot (2.13-meter) long
RJ-45 patch cable
For installations that require a separate grounding conductor to the chassis, the router
must be adequately grounded before power is connected to ensure proper operation
and to meet safety and electromagnetic interference (EMI) requirements. To ground a
ACX5000 router, connect a grounding cable to earth ground and then attach it to the
chassis grounding points.
WARNING: The router is pluggable type A equipment installed in a
restricted-access location. It has a separate protective earthing terminal
provided on the chassis in addition to the grounding pin of the power supply
cord. This separate protective earthing terminal must be permanently
connected to earth ground for installations that require a separate grounding
conductor to the chassis.
Pin
1
"Interface Specifications for
Maximum Length
7 feet (2.13 meters)
328 feet
(100 meters)
Chapter 8: Cable Specifications
for
Device
Receptacle
RJ-45
RJ-45
93