Ptx10003 Management Cable Specifications And Pinouts; Ptx10003 Cable Specifications For Console And Management Connections - Juniper PTX10003-80C Hardware Manual

PTX10003 Management Cable Specifications and
Pinouts
IN THIS SECTION

PTX10003 Cable Specifications for Console and Management Connections | 89

PTX10003 Management Port Connector Pinouts | 90
PTX10003 Console Port Connector Pinouts | 90
PTX10003 SFP Port Connector Pinouts | 91
PTX10003 SFP+ Port Connector Pinouts | 92
PTX10003 QSFP+ and QSFP28 Port Connector Pinouts | 93
PTX10003 USB Port Specifications | 95
PTX10003 Cable Specifications for Console and Management Connections
Table 30 on page 89 lists the specifications for the cables that connect the PTX10003 to a management
device.
NOTE: The PTX10003 also has an SFP management port that supports transceivers that use
fiber-optic cables. See
information about supported transceivers.
Table 30: Cable Specifications for Console and Management Connections for the PTX10003
Port on PTX10003 Cable Specification
Console (CON) port RS-232 (EIA-232) serial
cable
Management Category 5 cable or
(MGMT) port equivalent suitable for
1000 BASE-T operation
"Determining Transceiver Support for the PTX10003" on page 78
Cable Supplied
One 2.13-meter-long RJ-45
patch cable and RJ-45 to
DB-9 adapter
One 2.13-meter-long RJ-45
patch cable
for more
Maximum Device
Length Receptacle
2.13 meters RJ-45
100 meters RJ-45
89