debug vrrp
debug vrrp
To enable debugging of the Virtual Router Redundancy Protocol (VRRP), use the debug vrrp command
in privileged EXEC mode. To disable debugging, use the no form of this command.
Syntax Description
all
errors
events
packets
process
registry
state
timer
track
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(52)EY
Usage Guidelines
The undebug vrrp command is the same as the no debug vrrp command.
Related Commands
Command
show debugging
Cisco ME 3800X and ME 3600X Switch Command Reference
B-38
debug vrrp {all | errors | events | packets | process | registry | state | timer | track}
no debug vrrp {all | errors | events | packets | process | registry | state | timer | track}
Displays all VRRP debug messages.
Displays debug messages for VRRP error reporting.
Displays debug messages for protocol and interface events.
Displays debug messages. for VRRP packet details.
Displays debug messages for VRRP process activities.
Displays debug messages for VRRP registry reporting.
Displays VRRP state change debug messages;
Displays debug messages for VRRP timer reporting.
Displays debug messages VRRP monitor tracking.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B
Cisco ME 3800X and ME 3600X Switch Debug Commands
OL-28238-01