Renaming Zones, Zone Sets, and Aliases Using Fabric Manager
Renaming Zones, Zone Sets, and Aliases Using Fabric Manager
To rename a zone, zone set, or alias using Fabric Manager, follow these steps:
Step 1
Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2
Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN (see
Database Dialog Box, on page
Figure 36: Edit Local Full Zone Database Dialog Box
Step 3
Click a zone or zone set in the left pane.
Step 4
Choose Edit > Rename.
An edit box appears around the zone or zone set name.
Step 5
Enter a new name.
Step 6
Click Activate or Distribute.
Cloning Zones, Zone Sets, FC Aliases, and Zone Attribute Groups
To clone a zone, zoneset, fcalias, or zone-attribute-group, follow these steps:
Step 1
switch# configure terminal
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
86
86).
Configuring and Managing Zones
Figure 36: Edit Local Full Zone