Qos Features And Components - Cisco SX350 Series Administration Manual

20

QoS Features and Components

347
The QoS feature is used to optimize network performance.
QoS provides the following:
• Classification of incoming traffic to traffic classes, based on attributes, including:
- Device Configuration
- Ingress interface
- Packet content
- Combination of these attributes
QoS includes the following:
• Traffic Classification—Classifies each incoming packet as belonging to a specific
traffic flow, based on the packet contents and/or the port. The classification is done by
ACL (Access Control List), and only traffic that meets the ACL criteria is subject to
CoS or QoS classification.
• Assignment to Software Queues—Assigns incoming packets to forwarding queues.
Packets are sent to a particular queue for handling as a function of the traffic class to
which they belong. See Queue.
• Other Traffic Class-Handling Attribute—Applies QoS mechanisms to various
classes, including bandwidth management.
QoS Operation
The type of header field to be trusted is entered in the
that field, an egress queue is assigned, indicating through which queue the frame is sent, in the
CoS/802.1p to a Queue
mode is CoS/802.1p or DSCP, respectively).
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
page or the DSCP to Queue
Quality of Service
QoS Features and Components
Global Settings page. For every value of
page (depending on whether the trust