Download Or Upload A Configuration File Via Http; Save A Configuration File Onto Your Pc Via Http; Figure 131. Configuration File Backup/Restore Via Http Page - Allied Telesis AT-FS750/20 User Manual

Download or Upload a Configuration File via HTTP

Save a
Configuration
File onto Your
PC Via HTTP
This section describes how to download or upload a configuration file
using HTTP on an Internet server. For example, you can save the switch's
configuration file to your PC, then the saved file can be transferred to other
switches.
Before you download or upload a configuration file via HTTP, note the
following:
 You must be able to access your configuration file from your PC
when uploading the file from a PC to the switch.

The switch that you are working with must have an IP address and
subnet mask assigned, either manually or via DHCP. For
instructions on how to manually set the IP address and subnet
mask on a switch, see "Configuration of IPv4 Address, Subnet
Mask and Gateway Address" on page 30. To enable a DHCP
client, see "DHCP Client Configuration" on page 56.
To download a configuration file to your PC, perform the following
procedure:
1. From the menu on the left side of the home page, select the Tools
folder.
The Tools folder expands.
2. From the Tools folder, select Config File Backup/Restore folder.
The Config File Backup/Restore folder expands.
3. From the Config File Backup/Restore folder, select via HTTP.
The Configuration File Backup/Restore via HTTP page is displayed.
See Figure 131.

Figure 131. Configuration File Backup/Restore via HTTP Page

4. Click the Backup button.
FS750 Series Fast Ethernet WebSmart User's Guide
377