Panasonic ZEQUO 6400 Operating Instructions Manual page 575

53. MLD Snooping Commands
vlanid Specify a range of VLANs to be configured.
<vlanid_list>
Specify the VLAN ID list.
<value 1-1000>
Specify the rate limit of MLD control packet that the Switching Hub can process on a
specific port/VLAN. The rate is specified in packet per second. The packet that exceeds
the limited rate will be dropped.
no_limit The default setting is no limit.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the MLD snooping packet rate limit on port 1 for 100pps:
Zxxx0:admin#config mld_snooping rate_limit ports 1 100
Command: config mld_snooping rate_limit ports 1 100
Success.
Zxxx0:admin#
53.3. show mld_snooping rate_limit
 Description
This command is used to display the MLD snooping rate limit setting.
 Format
show mld_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>]
 Parameters
ports Specify a range of ports to be displayed.
<portlist>
Specify a range of ports to be displayed.
vlanid Specify a range of VLANs to be displayed.
<vlanid_list>
Specify the VLAN ID list.
 Restrictions
None.
 Example
576