Panasonic ZEQUO 6400 Operating Instructions Manual page 969

86. Voice VLAN Commands
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To set the priority of the voice VLAN to be six:
Zxxx0:admin#config voice_vlan priority 6
Command: config voice_vlan priority 6
Success.
Zxxx0:admin#
86.4. config voice_vlan oui
 Description
This command is used to configure the user-defined voice traffic's OUI. The OUI is used to
identify the voice traffic. There are a number of pre-defined OUIs. The user can further
define the user-defined OUIs if needed. The user-defined OUI cannot be the same as the
pre-defined OUI. The following are the pre-defined voice traffic's OUI:
OUI
00:E0:BB
00:03:6B
00:E0:75
00:D0:1E
00:01:E3
00:60:B9
00:0F:E2
00:09:6E
 Format
config voice_vlan oui [add | delete] <macaddr> <macmask> {description <desc 32>}
 Parameters
add Specify to add a user-defined OUI of Voice device vendor.
delete Specify to delete a user-defined OUI of Voice device vendor.
<macaddr> Specify a user-defined OUI MAC address.
<macmask> Specify a user-defined OUI MAC address mask.
description (Optional) Specify a description for the user-defined OUI.
<desc 32> Specify a description for the user-defined OUI. The maximum length is 32
characters.
Vendor
3COM
Cisco
Veritel
Pingtel
Siemens
NEC/Philips
Huawei-3COM
Avaya
970
Mnemonic Name
3com
cisco
veritel
pingtel
siemens
nec&philips
huawei&3com
avaya