Panasonic ZEQUO 6400 Operating Instructions Manual page 736

63.13. show pim6 mroute star_g
 Description
This command is used to display the multicast routing information for (*, G) entries
generated by PIM6.
 Format
show pim6 mroute star_g {group <ipv6addr> {ipif <ipif_name 12>}}
 Parameters
group (Optional) Specify the IPv6 multicast group address to be displayed.
<ipv6addr>
Enter the IPv6 address.
ipif (Optional) Specify the IPv6 interface to be displayed.
<ipif_name 12>
Enter the IPv6 interface name.
 Restrictions
None.
 Example
To show the whole IPv6 multicast routing table of (*, G) generated on the Switching Hub:
Zxxx0:admin#show pim6 mroute star_g
Command: show pim6 mroute star_g
(*, G) Entry Table
-------------------------
Group : FF13::100
Upstream : n2
RP Address : 3FFE:10:10::153
Group : FF13::101
Upstream : n2
RP Address : 3FFE:10:10::153
Group : FF13::102
Upstream : n2
RP Address : 3FFE:10:10::153
Total Entries: 3
Zxxx0:admin#
63. PIM for IPv6 Command List
737