87. VLAN Commands
Example
To set the Join time to 200 milliseconds:
Zxxx0:admin#config gvrp timer join 200
Command: config gvrp timer join 200
Success.
Zxxx0:admin#
87.10. enable gvrp
Description
This command is used to enable the Generic VLAN Registration Protocol (GVRP). The
default is disabled.
Format
enable gvrp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the generic VLAN Registration Protocol (GVRP):
Zxxx0:admin#enable gvrp
Command: enable gvrp
Success.
Zxxx0:admin#
988