Panasonic ZEQUO 6400 Operating Instructions Manual page 739

63. PIM for IPv6 Command List
 Parameters
<ipv6networkaddr>
Specify the multicast group network address for this static RP.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To delete a static RP:
Zxxx0:admin#delete pim6 static_rp group FF02::11/64
Command: delete pim6 static_rp group FF02::11/64
Success.
Zxxx0:admin#
63.17. config pim6 embedded_rp state
 Description
This command is used to configure the state of the embedded RP.
 Format
config pim6 embedded_rp state [enable | disable]
 Parameters
enable Specify to enable embedded RP support in PIM6.
disable Specify to disable embedded RP support in PIM6.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To enable the embedded RP state:
Zxxx0:admin#config pim6 embedded_rp state enable
Command: config pim6 embedded_rp state enable
Success.
Zxxx0:admin#
740