Panasonic ZEQUO 6400 Operating Instructions Manual page 693

60. OSPFv3 Commands
60.20. show ospfv3 virtual_link
 Description
This command is used to display OSPFv3 virtual link configurations. If no parameters are
set, all the virtual links will be displayed.
 Format
show ospfv3 virtual_link {<area_id> <neighbor_id>}
 Parameters
<area_id>(Optional) Specifies a 32-bit number in the form of an IPv4 address that uniquely
identifies the OSPFv3 area in the OSPFv3 domain. This area is the transit area where the
virtual link is built.
<neighbor_id>
(Optional) Specifies a 32-bit number in the form of an IPv4 address that uniquely
identifies the OSPFv3 virtual neighbor in the OSPFv3 domain.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To display an OSPFv3 virtual link:
694