Panasonic ZEQUO 6400 Operating Instructions Manual page 166

12.8. disable ipif_ipv6_link_local_auto
 Description
This command is used to disable the auto configuration of link local address when no
IPv6 address is explicitly configured.
 Format
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
 Parameters
<ipif_name 12>
The name of the interface.
all All of the IP interfaces.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To disable the automatic configuration of link local address for an interface:
Zxxx0:admin#disable ipif_ipv6_link_local_auto interface1
Command: disable ipif_ipv6_link_local_auto interface1
Success.
Zxxx0:admin#
12.9. show ipif_ipv6_link_local_auto
 Description
This command is used to display the link local address automatic configuration state.
 Format
show ipif_ipv6_link_local_auto {<ipif_name 12>}
 Parameters
<ipif_name 12>
(Optional) The name of the interface.
167
12. Basic IP Commands