30. FDB Commands
Parameters
port
(Optional) Specify the entries for one port.
<port>Specify the entries for one port.
vlan
(Optional) Specify to display the entries for a specific VLAN.
<vlan_name 32>
The maximum length is 32 characters.
vlanid
(Optional) Specify to display the entries by VLAN ID list.
<vidlist>
Specify to display the entries by VLAN ID list.
mac_address
(Optional) Specify the MAC address.
<macaddr>
Specify the MAC address.
static
(Optional) Specify to display all permanent entries.
aging_time
Specify to display the unicast MAC address aging time.
security Specify to display the security settings.
If no parameter is specified, all unicast FDB entries will be displayed.
Restrictions
None.
Example
To display unicast MAC address table:
Zxxx0:admin#show fdb
Command: show fdb
Unicast MAC Address Aging Time
VID
VLAN Name
---- -------------------------------- ----------------- ----- ------- -------
1
default
1
default
Total Entries: 2
Zxxx0:admin#
= 300
MAC Address
00-01-02-03-04-00 CPU
00-26-5A-AE-CA-1C 21
368
Port
Type
Status
Self
Forward
Dynamic Forward