Table of Contents
Advertisement
74.14. config stp ports
Description
This command is used to configure all the parameters of ports, except for Internal
Path Cost and Port Priority.
Format
config stp ports <portlist> {externalCost [auto | <value 1-200000000> ] | hellotime
<value 1-2> | migrate [yes | no] | edge [true | false | auto] | p2p [true | false | auto] |
state [enable | disable] | restricted_role [true | false] | restricted_tcn [true | false] |
fbpdu [enable | disable ]} (1)
Parameters
<portlist>Specify a range of ports.
externalCost
Specify the path cost between the MST regions from the transmitting Bridge to the CIST
Root Bridge. It is only used at CIST level.
auto Specify to automatically choose the path cost.
<value 1-200000000>
Specify a value between 1 and 200000000.
hellotimeThis is a per-Bridge parameter in RSTP, but it becomes a per-Port parameter in MSTP.
<value 1-2>
This is a per-Bridge parameter in RSTP, but it becomes a per-Port parameter in
MSTP. The default value is 2.
migrate Operation of management in order to specify the port to send MSTP BPDU for a delay
time.
yes
Specify for port to send MSTP BPDU for a delay time.
no
Specify for port not to send MSTP BPDU for a delay time.
edge
Decide if this port is connected to a LAN or a Bridged LAN. In auto mode, the bridge will
delay for a period to become edge port if no bridge BPDU is received.
true Specify a true edge connection.
false Specify a false edge connection.
auto The bridge will delay for a period to become edge port if no bridge BPDU is
received.
p2p
Decide if this port is in Full-Duplex or Half-Duplex mode.
true Specify full-duplex mode.
false Specify half-duplex mode.
auto The Switching Hub will automatically determine the P2P mode.
state
Decide if this port supports the STP functionality.
enable
Enable to support STP functionality.
disable
Disable STP functionality support.
restricted_role
Decide if this port is to be selected as Root Port or not. The default value is false.
true Decide that this port is not to be selected as Root Port.
false Decide that this port is to be selected as Root Port.
74. Spanning Tree Protocol (STP) commands
873
Advertisement
Chapters
Table of Contents
