Panasonic ZEQUO 6400 Operating Instructions Manual page 315

25. DHCPv6 Relay Command List
25.2. disable dhcpv6_relay
 Description
This command is used to disable the DHCPv6 relay function on the Switch.
 Format
disable dhcpv6_relay
 Parameters
None.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the DHCPv6 relay global state to disable:
Zxxx0:admin# disable dhcpv6_relay
Command: disable dhcpv6_relay
Success.
Zxxx0:admin#
25.3. config dhcpv6_relay hop_count
 Description
Configure the DHCPv6 relay hop_count of the Switching Hub.
 Format
config dhcpv6_relay hop_count <value 1-32>
 Parameters
hop_count
Specifies the number of relay agents that have relayed this message. The default value is
4.
<value 1-32>
Enter the hop count number here. This value must be between 1 and 32.
316