Igmp Proxy Commands - Panasonic ZEQUO 6400 Operating Instructions Manual

35.IGMP Proxy Commands

IGMP (Internet Group Management Protocol) is a protocol to manage
multicast groups.
IGMP proxy is a function to transfer IGMP packets from multicast
members to the upstream router. If a multicast transmission route is
fixed, this function can transfer multicast packets between routers on
the fixed route without using a multicast routing protocol. If a
multicast server does not exist on the topology uplink, use the multicast
routing function.
enable igmp_proxy
disable igmp_proxy
config igmp_proxy downstream_if [add | delete] vlan [<vlan_name 32> | vlanid <vidlist>]
config igmp_proxy upstream_if {vlan [<vlan_name 32> | vlanid <vlanid 1-4094>] | router_ports
[add | delete] <portlist> | source_ip <ipaddr> | unsolicited_report_interval <sec 0-25>}(1)
show igmp_proxy {group}
35.1. enable igmp_proxy
 Description
This command is used to enable the IGMP proxy on the Switching Hub.
 Format
enable igmp_proxy
Figure 35-1 IGMP proxy overview
405
35. IGMP Proxy Commands