Panasonic ZEQUO 6400 Operating Instructions Manual page 683

60. OSPFv3 Commands
Zxxx0:admin# show ospfv3 aggregation
Command: show ospfv3 aggregation
OSPFv3 Area Aggregation Settings
Area ID Aggregated
Network Address
--------------- ------------------------------------------- -------- ---------
1.1.1.1 1000::/16
2.2.2.2 2000::/16
Total Entries: 2
Zxxx0:admin# show ospfv3 aggregation 2.2.2.2
Command: show ospfv3 aggregation 2.2.2.2
OSPFv3 Area Aggregation Settings
Area ID Aggregated
Network Address
--------------- ------------------------------------------- -------- ---------
2.2.2.2 2000::/16
Total Entries: 1
Zxxx0:admin#
60.13. show ospfv3 lsdb
 Description
This command is used to display OSPFv3 Link-State Database.
 Format
show ospfv3 lsdb {area <area_id> | type [rtrlink | netlink | inter_area_prefix |
inter_area_router | asextlink | link_lsa | intra_area_prefix]}
 Parameters
area (Optional) Specifies that only the LSAs that belong to this area will be displayed.
<area_id>
Enter the area ID used here.
684
LSDB Advertise
Type
Summary Disabled
Summary Disabled
LSDB Advertise
Type
Summary Disabled