Example
To create a static RP:
Zxxx0:admin# create pim static_rp group 239.1.1.0/24 rp 10.52.33.18
Command: create pim static_rp group 239.1.1.0/24 rp 10.52.33.18
Success.
Zxxx0:admin#
62.15. delete pim static_rp group
Description
This command is used to delete a static RP.
Format
delete pim static_rp group <network_address>
Parameters
group
Specifies the multicast group address that will removed from the static RP.
<network_address>
Enter the multicast group address used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a static RP:
Zxxx0:admin# delete pim static_rp group 224.1.2.0/24
Command: delete pim static_rp group 224.1.2.0/24
Success.
Zxxx0:admin#
62. Protocol Independent Multicast (PIM) Commands
717