Panasonic ZEQUO 6400 Operating Instructions Manual page 602

Zxxx0:admin# delete nlb multicast_fdb default 03-bf-01-01-01-01
Command: delete nlb multicast_fdb default 03-bf-01-01-01-01
Success.
Zxxx0:admin#
56.3. config nlb multicast_fdb
 Description
This command is used to configure the Switch's NLB multicast FDB entry.
 Format
config nlb multicast_fdb [<vlan_name 32> | vlanid <vlanid>] <macaddr> [add | delete]
<portlist>
 Parameters
<vlan_name 32>
Enter the VLAN name of the NLB multicast FDB entry here. This name can be up to 32
characters long.
vlanid Specifies the VLAN ID used.
<vlanid>
Enter the VLAN ID used here.
<macaddr>
Specifies the MAC address of the NLB multicast FDB entry to be configured.
add Specifies a list of forwarding ports to be added.
delete Specifies a list of forwarding ports to be deleted.
<portlist>Specifies a list of forwarding ports to be added or deleted.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure NLB multicast MAC forwarding database:
Zxxx0:admin# config nlb multicast_fdb default 03-bf-01-01-01-01 add 1:1-1:5
Command: config nlb multicast_fdb default 03-bf-01-01-01-01 add 1:1-1:5
Success.
Zxxx0:admin#
56. Network Load Balancing (NLB) Commands
603