Panasonic ZEQUO 6400 Operating Instructions Manual page 332

26.14. show dhcpv6_server
 Description
This command is used to display the DHCPv6 server setting.
 Format
show dhcpv6_server {ipif <ipif_name 12>}
 Parameters
ipif (Optional) Specifies the IP interface name to be displayed.
<ipif_name 12>
Enter the IP interface name to be displayed here. This name can be up to 12
characters long.
 Restrictions
None.
 Example
To display the DHCPv6 server setting:
Zxxx0:admin# show dhcpv6_server
Command: show dhcpv6_server
DHCPv6 Server Global State: Disabled
---------------------------------------------------------------
IP Interface
DHCPv6 Server State
IP Interface
DHCPv6 Server State
Total Entries : 2
Zxxx0:admin#
: System
: Enabled
: ipif1
: Enabled
333
26. DHCPv6 Server Commands