Panasonic ZEQUO 6400 Operating Instructions Manual page 288

Zxxx0:admin#create dhcp excluded_address begin_address 10.10.10.1 end_address
10.10.10.10
Command: create dhcp excluded_address begin_address 10.10.10.1 end_address
10.10.10.10
Success.
Zxxx0:admin#
23.2. delete dhcp excluded_address
 Description
This command is used to delete a DHCP server exclude address.
 Format
delete dhcp excluded_address [begin_address <ipaddr> end_address <ipaddr> | all]
 Parameters
begin_address
Specify the starting address of the IP address range.
<ipaddr>
Specify the starting address of the IP address range.
end_address
Specify the ending address of the IP address range.
<ipaddr>
Specify the ending address of the IP address range.
all Specify to delete all IP addresses.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To delete a DHCP server exclude address:
Zxxx0:admin#delete dhcp excluded_address begin_address 10.10.10.1 end_address
10.10.10.10
Command: delete dhcp excluded_address begin_address 10.10.10.1 end_address
10.10.10.10
Success.
Zxxx0:admin#
23. DHCP Server Commands
289