Panasonic ZEQUO 6400 Operating Instructions Manual page 669

59. Open Shortest Path First (OSPF) Command List
 Example
To display OSPF neighbor information:
Zxxx0:admin# show ospf neighbor
Command: show ospf neighbor
IP Address of Router ID of
Neighbor Neighbor
--------------- --------------- -------- -------------
10.48.74.122 10.2.2.2
Total Entries : 1
Zxxx0:admin#
59.24. show ospf virtual_neighbor
 Description
This command is used to display the OSPF-neighbor information of OSPF virtual links.
 Format
show ospf virtual_neighbor {<area_id> <neighbor_id>}
 Parameters
<area_id>(Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF domain.
<neighbor_id>
(Optional) Specifies the OSPF router ID for the remote area. This is a 32-bit number in the
form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the remote area's Area
Border Router.
If no parameter is specified, the system will display all OSPF virtual-link neighbor information.
 Restrictions
None.
Neighbor Neighbor
Priority State
1 Initial
670