Panasonic ZEQUO 6400 Operating Instructions Manual page 340

27. Distance Vector Multicast Routing Protocol (DVMRP) Commands
 Restrictions
None.
 Example
To display DVMRP configurations:
Zxxx0:admin#show dvmrp
Command: show dvmrp
DVMRP Global State : Disabled
Interface IP Address
------------ -----------------
System 192.168.69.123
Total Entries: 1
Zxxx0:admin#
27.5. show dvmrp neighbor
 Description
This command is used to display the DVMRP neighbor table.
 Format
show dvmrp neighbor {ipif <ipif_name 12> | ipaddress <network_address>}
 Parameters
ipif (Optional) Specifies the IP interface name used for the display.
<ipif_name 12>
Enter the IP interface name used for the display here. This name can be up to 12
characters long.
ipaddress
(Optional) Specifies the IP address and netmask of the destination used.
<network_address>
Enter the IP address and netmask of the destination used here.
If no parameter is specified, the system will display the whole DVMRP neighbor table.
 Restrictions
None.
 Example
To display DVMRP neighbor table:
Neighbor Timeout Probe
---------------- -----
35 10
341
Metric State
------ --------
1 Disabled