53. MLD Snooping Commands
53.7. show mld_snooping static_group
Description
This command is used to display the MLD snooping static groups.
Format
show mld_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>}
Parameters
vlan
(Optional) Specify the name of the VLAN on which the static group resides.
<vlan_name 32>
Specify the VLAN name. The maximum length is 32 characters.
vlanid
(Optional) Specify the ID of the VLAN on which the static group resides.
<vlanid_list>
Specify the VLAN ID list.
<ipv6addr>
(Optional) Specify the multicast group IPv6 address (for Layer 3 Switching Hub).
Restrictions
None.
Example
To display all the MLD snooping static groups:
Zxxx0:admin#show mld_snooping static_group
Command: show mld_snooping static_group
VLAN ID/Name
IP Address
-------------
---------------
1/Default
FF1E::1
Total Entries : 1
Zxxx0:admin#
Static Member Ports
---------------------
9-10
580